SOLD
2010 Chevrolet TRANS-AM 455
2010 CAMARO/TRANS-AM 455, LINGENFELTER 455ci w/655 HP, TRANS AM SUPERDUTY!!!
Lingenfelter Performance Engineering has revived the legendary 2nd Generation Trans-AM 455 - Based on a 2010 Camaro SS, Lingenfelter has redesigned almost every panel of the Camaro, leaving only the doors and the roof intact. They parked a 1971 Pontiac Trans Am alongside the donor car for inspiration.
The recessed headlights and fog lights and the twin grille with offsetting borders practically scream Burt Reynolds. The seats are covered in a period-appropriate pattern and fabric, and it's swathed in GM's classic blue.
At the heart of the new Trans Am is Lingenfelter's 455-cubic-inch RHS aluminum block, ported and polished heads, a custom grind camshaft and a Fast LSX 102 intake. The result is a 655-hp, 610-lb-ft Screaming Bird capable of a 12.46 quarter mile at 116MPH on Street Tires.
Only 6 of these examples were created and this beauty only shows 3,086 miles registered. This is an amazing build and a real head turner!!!
Lingenfelter TA Package Content
Engine and Drivetrain
Custom LSX block
455ci displacement
655 hp
610 lb-ft of torque
11.5:1 compression ratio
Lingenfelter CNC-ported-and-polished LS7 heads
LPE/Fast LSX 102mm intake
Lingenfelter GT 19 camshaft
Lingenfelter six-bolt LS9 flywheel and twin-disc clutch assembly
Corsa custom stainless exhaust
DSS heavy-duty rear half-shafts
LPE 20-inch Rally II wheels
Nitto tires (275/40ZR20 front and 315/35ZR20 rear)
Body Modifications
Functional Shaker scoop and custom hood
LTA concept body modifications to all body panels except doors and roof
'69 Pontiac side-marker lights
'71 Pontiac Trans Am front turn signal and marker lights
OEM vinyl interior or Comfort-weave-inserts on seating surfaces and door panels
LTA SPECS
Year/Model: '10 Lingenfelter LTA
Race Weight With Driver: 4,340 lbs
Curb Weight: 4,100 lbs
Fuel Level When Weighed: Full
Fuel: 93 octane
Engine: GMPP LSX cast-iron block (Lingenfelter 455)
Cubic Inches: 455
Engine Built By: Lingenfelter Performance Engineering, Decatur, IN
Induction System
Air Filter: K&N
Throttle Body: GM 90mm
Fuel Injectors: Bosch 43 lb-hr
Intake Manifold: FAST LSX/LS 102 mm
Fuel System
Pump: GM factory '10 Camaro SS fuel pump with Lingenfelter '10-'11 Camaro SS fuel-pump voltage booster kit
Lines: Stock
Regulator: N/A
Heads
Casting: GM LS7 No. 8452
Head Porting: LPE CNC ported and hand-finished
Flow Numbers: N/A
Valves: GM LS7 titanium intake and hollow-stem exhaust, 2.205/1.614-in
Valvesprings: Ferrea S99100, titanium retainers
Pushrods: Comp Cams Hi Tech chrome-moly, 7.800-in length, 3/8-in diameter, 0.080-in wall
Bottom End
Pistons: JE, forged aluminum, 4.185-in, 7cc dish,
Rings: Total Seal 0.043-in, 0.043-in, 3mm; stainless top, cast second
Rods: Manley, 4340 forged I-beam, 6.125-in
Compression Ratio: 11.5:1
Crankshaft: Callies, 4340 forged steel, 4.125-in stroke
Rotating Assembly Balanced: Yes
Mods: GM CTS-V lifters; heavy-duty timing chain; ARP head studs; ATI 10% underdrive damper; LPE LS9 six-bolt twin-disc clutch kit
Oiling System
Oil Pump: LPE LS high-volume oil pump kit, single-stage gerotor
Windage Tray: LPE-modified stock GM LS3 Camaro
Oil Pan: LPE-modified stock GM LS3 Camaro
Camshaft
Brand: LPE GT19 hydraulic roller
Duration at 0.050: 227/239-deg
Duration Advertised: 277/289-deg (at 0.006-in)
Lift with Specified Rocker Arms: 0.677/0.688-in
Lobe Separation Angle: 114-deg
Installed Position: 114-deg
Rocker Arms: GM LS7 rockers, 1.8:1; heavy-duty bearing upgrade
Ignition
Type: Crank trigger, GM LS3 production coil-near-plug system
Wires: Magnecor, 8.5 mm
Spark Plugs: ACDelco, 41-104
Total Timing: 26 degrees
Rpm Total Timing is Reached: 6,000 rpm
Exhaust
Headers: American Racing
Primaries: 1.875-in
Collectors: 3.00-in
Exhaust Pipes: 3.00-in
Mufflers: Two Corsa stainless-steel, 2.5-in in/2.5-in out
Crossover: American Racing, 3.00-in
Drivetrain
Transmission: Stock, Tremec TR6060
Converter/Clutch: LS9 ZR1 twin-disc clutch and six-bolt flywheel assembly
Shifter: Stock
Rear: Stock
Rear Gear Ratio: 3.45
Posi: Yes
Axles: LPE heavy-duty half-shafts
Chassis and Suspension
Brakes F/R: Stock, Brembo fixed four-piston aluminum calipers, 14.0-in rotors (front) / 14.4-in rotors
Wheels F/R: LPE Rallys 20×10 / 20×11
Tires F/R: Nitto NT05 275/40ZR20 / 315/35ZR20
Tire Pressure F/R: 40/40 psi
Suspension: Stock Camaro 2SS FE3
Great lease rates and Financing also available on any of our inventory!
Buy Sell Trade Consignments Welcome!
Please email concierge@fusionluxurymotors.com or call 1-818-773-8181
Whilst Fusion Motor Company make a sincere effort to supply information that is accurate and complete, we are aware that errors and omissions may occur. Therefore, we are not able to guarantee the accuracy of the information and we cannot accept liability for loss or damage arising from misleading information or for any reliance on which you may place on the information contained on this website or our advertisements. We highly recommend that you examine the vehicle to check the accuracy of the information supplied. If you have any questions, please contact us at concierge@fusionluxurymotors.com or by calling 818-773-8181
Specs
- Year
- 2010
- Make
- Chevrolet
- Model
- TRANS-AM 455
- Miles
- 3,086
- Engine Size
- 8 Cylinder Engine
- Vin
- 2G1FT1EW0A9141395
Loan Calculator
Mon-Fri: 10am-7pm
Sat: 10am-3pm
Sun By Appointment
Whilst Fusion Motor Company make a sincere effort to supply information that is accurate and complete, we are aware that errors and omissions may occur. Therefore, we are not able to guarantee the accuracy of the information and we cannot accept liability for loss or damage arising from misleading information or for any reliance on which you may place on the information contained on this website or our advertisements. We highly recommend that you examine the vehicle to check the accuracy of the information supplied. If you have any questions, please contact us at concierge@fusionluxurymotors.
Contact us
(818) 773-8181