1971 Plymouth HEMI CUDA CONVERTIBLE
1971 Plymouth Cuda Convertible, HEMI Upgrade, Sublime Green, Pistol Grip 4-Speed
Perhaps one of the most Iconic Muscle Cars of all time is the Hemi Cuda and the rarest of the rare is a '71 Hemi Convertible with only 12 believed to have been produced.
Presented is a very well done real 71 Cuda Convertible that has been upgraded under the hood with the Vaunted 426 Hemi mated to a Pistol Grip 4 Speed Manual.
Finished in High Impact Sublime Green with a black top and black interior, this Hemi is stunning inside and out and runs very well and strong.
An excellent opportunity to turn heads with an iconic muscle car that will not disappoint.
Great lease rates and Financing also available on any of our inventory!
Buy Sell Trade Consignments Welcome!
Please email firstname.lastname@example.org or call 1-818-773-8181
About the Cuda:
The Plymouth Barracuda was manufactured from 1964 to 1974.
The first-generation Barracuda, a hardtop fastback, was based on the A-body platform (shared with the Valiant). The first generation car featured distinctive wraparound back glass and was marketed from 1964 to 1966.
The second-generation Barracuda, built from 1967 to 1969, though still Valiant-based, was heavily redesigned. Body designs were now available in fastback, hardtop coupé, and convertible versions.
The third generation, offered from 1970 to 1974, was no longer based on the A-body, but on the Chrysler E-body. The completely new design was similar to the Dodge Challenger and available in hardtop and convertible body styles. The Barracuda was discontinued after the 1974 model year.
The third generation Barracuda was launched in 1970 and removed all its previous commonality with the Valiant. The original fastback design was deleted from the line and the Barracuda now consisted of coupe and convertible models. The all-new model, styled by John E. Herlitz, was built on a shorter, wider version of Chrysler's existing B platform, called the E-body.
Sharing this platform was the newly launched Dodge Challenger; however no exterior sheet metal interchanged between the two cars, and the Challenger, at 110 inches, had a wheelbase that was 2 inches longer than the Barracuda.
Three versions were offered for 1970 and 1971: the base Barracuda (BH), the luxury oriented Gran Coupe (BP), and the sport model 'Cuda (BS). The high-performance models were marketed as 'Cuda deriving from the 1969 option. The E-body's engine bay was larger than that of the previous A-body, facilitating the release of Chrysler's 426 cu in Hemi for the regular retail market.
For 1970 and 1971, the Barracuda had two six-cylinder engines available as well as three different V8s: the 318ci, the 383ci with two-barrel carburetor and single exhaust, and the 383ci with four-barrel carburetor and dual exhaust 330HP.
The Cuda had the 383ci 335HP as the standard engine. It also had the 440ci four-barrel Super Commando, the 440ci six-barrel Super Commando Six Pak, and the 426ci Hemi. The 440- and Hemi-equipped cars received upgraded suspension components and structural reinforcements to help transfer the power to the road.
The Barracuda was changed slightly for 1971, with a new grille and taillights, seat, and trim differences. This would be the only year that the Barracuda would have four headlights and also the only year of the fender "gills" on the 'Cuda model.
The 1971 Barracuda engine options would remain the same as that of the 1970 model, except that the 340 6-Bbl was gone, and the four-barrel carbureted 440 V8 engine was no longer on the option list, but could be had via a special order and perhaps a dozen cars were built with it installed; otherwise the 440-powered Barracudas had a six-barrel carburetor setup instead.
In 1971 the big-block power options offered to the customer were:
275HP in the 383-2V
300HP in the 383-4V
385HP in the 440-6V
425HP in the 426-8V
In 1970 and 1971 only, the shaker hood (option code N96), elastomeric (rubber) colored bumpers, and the Spicer-built Dana 60 rear axle were available. The shaker hood was available with 340, 383, 440 four-barrel, 440 six-barrel, and 426 Hemi engines. The elastomeric colored bumpers were available either as a front-only option, option code A21, or as a front and rear combination, option code A22. The heavy-duty Dana 60, with a 9.75" ring gear, was standard equipment with manual transmissions and 440 six-barrel and 426 Hemi engines, and was optional on those with the automatic transmission.
Whilst Fusion Motor Company make a sincere effort to supply information that is accurate and complete, we are aware that errors and omissions may occur. Therefore, we are not able to guarantee the accuracy of the information and we cannot accept liability for loss or damage arising from misleading information or for any reliance on which you may place on the information contained on this website or our advertisements. We highly recommend that you examine the vehicle to check the accuracy of the information supplied. If you have any questions, please contact us at email@example.com or by calling 818-773-8181
- HEMI CUDA CONVERTIBLE
- Engine Size
- 426 HEMI V8
Sun By Appointment
Whilst Fusion Motor Company make a sincere effort to supply information that is accurate and complete, we are aware that errors and omissions may occur. Therefore, we are not able to guarantee the accuracy of the information and we cannot accept liability for loss or damage arising from misleading information or for any reliance on which you may place on the information contained on this website or our advertisements. We highly recommend that you examine the vehicle to check the accuracy of the information supplied. If you have any questions, please contact us at concierge@fusionluxurymotors.